The No. 1 selection among all Roof Fall protection Systems. The ASIAFIX Horizontal Lifeline System and Anchor Point System is designed to suit a large selection of steel roofing profiles available in the marketplace. This versatility enables us to design a single system that is suitable for both rivet and clamping applications.

The ASIAFIX Horizontal Lifeline System together with the EC Shuttle allows the user to transverse along the lifeline continuously while eliminating the hassle of disconnecting from the line between posts hence reducing the risk of falling while working at height.

The Asiafix is manufactured and tested in accordance with European Standards EN795:2012 Type A and Type C & CEN/TS-16415:2013.

The Seamfix Lifeline System and Anchor Point System is the solution for fall protection on metal seam roofs. Available to 2 baseplate selections, the Seamfix 450 or Seamfix 660 will always fit to the various metal roofs cover width. The adjustability of the Seamfix offers flexibility to enable adjustments to be carried out on site to the various dimensions of the roofing profile.

The Smart design of the Seamfix ensures that the fall energy is absorbed by the materials therefore the fall force is greatly reduced, minimizing damage to the roof and the user.

The Seamfix is rapidly and easily installed onto the standing seam without penetration of the roof.

The Seamfix is manufactured and tested in accordance with European Standards EN795:2012 Type A and Type C & CEN/TS-16415:2013.

The Twistfix Lifeline and Anchor Point System is the solution for Membrane or Concrete Roofs. The Twistfix Post can be custom coated according to special membrane roof types.

The Smart design of the Twistfix makes the installation fo this system easy and secure. The Twistfix post are installed directly on top of the roofing material, after which a choice of mechanical anchors are installed by piercing the roofing material and insulation.

The Twistfix post can be sealed off with a collar similar to the membrane material ensuring the anchorages are fully waterproofed.

The Twistfix is manufactured and tested in accordance with European Standards EN795:2012 Type A and Type C & CEN/TS-16415:2013.

The Vertifix is a Vertical Lifeline System in combination with the Vertifix Rope Grab, designed for securing users for a vertical climb from ground level up.

The Vertifix can be easily installed on both round and square rungs of the ladder. With the option of the Vertifix Elongation Bar, it allows for users to clean the upper step of the ladder, safely onto the roof surface or landing platform therefore ensuring users to be fully secured on the vertical lifeline system always.

The Vertifix is manufactured and tested in accordance with European Standards EN353-1:2018

The Travelfix Overhead Lifeline System offers a  solution for securing and working safely on top of an elevated environment where there is an exposed risk of falling. Examples where this solution is used includes on tankers, trailers, aircrafts and more.

With the innovative design, the lifeline system can easily be attached to steel or concrete structures. The stainless steel Travelfix trolley is designed to move smoothly and stably over the stainless steel cable and allows the shuttle to pass the intermediate points without interruption.

The Travelfix is manufactured and tested in accordance with European Standards EN795:2012 Type C & CEN/TS-16415:2013.

The innovative WALLFIX Lifeline System has been expanded with a facade adapter type WALLFIX, which can be installed onto brick walls, concrete facades and steel columns.

Fall Protection on vertical walls or columns are not always easy to achieve. With the WALLFIX Lifeline System, fall protection at such work locations are now possible. Installations can be done on narrow passages, narrow roof surfaces with adjacent wall, as well as narrow passages in business or industrial areas where vertical steel columns are present.

The WALLFIX Anchor Plate triangular design makes various installation criterias easy. The WALLFIX is manufactured and tested in accordance with European Standards EN795:2012 Type A and Type C & CEN/TS-16415:2013.

The industry-leading horizontal lifeline system from SFS allows users to safely work at height without restrictions to their movement. 

Fitted to the outer roof skin, the system uses innovative shock-absorbing technology to spread and dissipate the shock load of a multi- or single-user fall, protecting both users and the roof structure.

The Eyecatcher positioning lines consist of a rope and are equipped with a smoothly movable line clamp. Available with and without a shock absorber, which greatly reduces the forces on the body in the event of a fall. Read the instructions on the energy absorber and/or the manual to determine whether there is sufficient free fall height available below the work area.

This temporary fall protection consists of a 20 meter long line that can be attached between two or more anchor points. The line can be easily secured with two carabiners. If there is no mounting option for this, please also order two slings that are placed around an object as a sling. You then attach the carabiners to these slings.

Very solid and reliable rail clamp that is suitable for I and HE beams. The beam clamp must be installed above the head and is easily and safely adjusted. A fall arrest block can be attached to the metal D-ring, the hook of which is secured to the D-ring on the back of the harness belt. During the user’s movement, the beam clamp follows and positions itself directly above the user. This ensures a zero-fall factor.

Very solid and reliable rail clamp that is suitable for I- and H- beams. Normally a beam clamp must be installed above the head, but this special rail clamp can also be clamped to vertical beams. The rail clamp is adjusted to the correct size and tightened with the handle and then secured. The entire rail clamp can be easily and safely adjusted. A fall arrest block, fall line or positioning line can be attached to the metal D-ring, the hook of which is secured to the D-ring on the back of the harness belt. 

The MP Clamp XL is intended as personal protective equipment and should be used as a mobile anchor point in combination with a line with energy absorber, fall arrest block or positioning line.The MP Clamp XL is not suitable for moving materials and/or objects or any other use other than fall protection equipment and should be used by one (1) person at a time. Rail tracks for facade maintenance installations and steel structures are ideally suited to serve as the basis for your fall protection system. This means that investments in permanent safety systems are not necessary.